I just picked this up today, it is a complete car. Everything is not going, i may salvage some stuff for the bondo bucket i just bought. Ill post pics tonight because i cant from my phone. Interior is tan/gold, seats are original and in extremely good cond.
intereseted in: tail panel tail lights and trim front and rear bumpers parking lights quarter panels trunk drops and maybe some other stuff:beer
Tail panel I may salvage/modify for GS, 1 good park light, front bumper has some chrome flaking no dents, no major rust. Tail lights and trim filthy and some pitting, no cracks. I need rear bumper, 1/4s and trunk drops are junk
crossflow radiator top plate ? maybe shroud ? see those on here sometimes but always miss the boat or loose track of time etc . pics appreciated . thanks . no rush .
Does your car have chrome side trim on the front seats. They look like the bucket seat hockey stick but don't have a pivot hole. I would be interested in both sides if your does. I think the trim may have been on 64 skylark 4 doors only but worth a try. Thanks.
Brian, Not sure if the seats have what you are looking for, can you tell from the picture? I dont see anything wrong with the shroud at all.
Bill, That seat doesn't have them. Must be a 64 item only. That car looks like it has some good parts. How about that antenna assembly and also that dash pad..............will that be for sale or do you need that for your car? Does that car have the wide anodized aluminum belt moldings/ window sweeps on all 4 doors ? ( not the ones that go around the door frame but the horizontal if your elbow was resting on the door.) Thanks.
Brian, I may have a set of those off a 4 door somewhere. How soon do you need them? I wanted them for my bucket seats but then found the hole was not there. I think I kept them.
The dash pad is decent, its still kind of soft. There are a few small cracks in it but they are not separated. "my" dash has been covered with padded vinyl "low rider" style, not sure what im going to do at this point. I have one car at the shop and one at home so I dont know what is usable for me (or pray to God a new owner!) I'll look at mldgs tomorrow, I think antenna is good.
Bill I added more on my prior post, Does that car have the wide anodized aluminum belt moldings/ window sweeps on all 4 doors ? ( not the ones that go around the door frame but the horizontal if your elbow was resting on the door.) I don't care to much about the aluminum parts but I need good rubber sweeps that attach to those moldings. Thanks. Please keep me in mind for the antenna, dash pad and the window sweep moldings/ rubber
I just talked with Bill, Purchasing the door outer stainless trim (not the window sweeps for you Brian), Door panels+armrests, interior headliner trim pieces, and seatbelts Also have first dibbs on radio and radio surround, as well as plastic dash surround if Bill does not keep them Thanks again, wes
Brian, if it does have the lower aluminum moulding, and good rubber, can the rubber be removed and go to you and I receive the aluminum part? Or if the rubber is no good? Since the aluminum is of no concern to youo No: Thanks, wes
have intrest in the stick change over the pedal assy with the hanger the clutch rods and z bar bell housing and fly wheel.... the rest is so heavy it isnt worth the shipping costs on my end...
Hi Bill I could use the non A/C alternator bracket. Please shoot me a price shipped to zip 28682.:TU: :beer
Hi Bill, I sent you an email, but it got shot back to me.. Perhaps you could PM me or email me your address? bilgerat671-AT-gmail.com
