i have a set of front springs from espo that i got from a board member here. they seem to be for 64 - 67 a body with a small block in it. i put them in with my 455 and it sat at the same height the stock springs did. these have zero miles on them or very few from the past owner. 40.00 + shipping. can get exact specs if needed. they are in berkley, ma.
Paul C., Would these work on a 64 Skylark with 300 and aluminum heads and manifold. Also if swap to Buick 350 later on would they still be stout enough? Interested, thanks. Shipping to 87020. Michael
these are the same diameter as my stock 300 front springs just 3/4" taller which i am sure was from my origanals being worn. my 300 had the iron heads and intake and i think is about the same weight as a 350. i think they will work fine for your intentions. if you want them i can take a pic and if you give me your zip code i can give you a shipping cost.
