Howdy, Anybody got one that they can take a picture of the pinion nose for me? I'm engineering how to put a Bosch 2U ABS system used in B-bodies on my 65 Riviera I'm building. I'm working with RRS in Australia to get the hubs designed to take the reluctor rings needed for front sensors. Now I need to figure out how to put the rear reluctor ring for the rear ABS. I was thinking that it would be easiest to mount the ring to the pinion nose if thats possible because putting it on the drive shaft would cause angularity problems as the rear end travels with the suspension and the nose climbs with power and dives with braking. The stock setup on the 8.5 10bolt in the B-body puts the reluctor on the pinion shaft inside the housing so that option is out as far as I can figure. Thanks in advance for the help,
