Selling this as a "LOT" which means one price for everything in the USPS Priority Small Shipping container. Just trying to make headway in liquidating my vast collection of parts for those years in particular. What is included: One Glove Compartment Light Assembly (working) One Courtesy Light, Under Dash (working) One Fader Control (believed to be functional) One Antenna Base with Lead Wire and Nut (functional) Floor Console Gear Indicator with metal backing plate. Fader control tested with Volt/Ohm meter set at Rx2000 - appeared to work but I am not an electronics expert. The Glove Box light and the Courtesy Light were tested with the use of a 9 volt battery. Please note that the wire for the clove box light has been cut and will need to be spliced. The antenna base is fully functional - tested the center post on the plug end of the lead wire to the threaded portion (where the antenna screws in) and no problems here. Price for this lot is $46.00 shipped to your door if you live in the lower 48 States. I can do personal checks, Postal Money orders (preferred) or Paypal if the buyer pays the "fees" on their end. Basically what I want to wind up with is $40.00 even once everything the dust settles. If you live outside of the Continental U.S. I will be happy to sell to you if you have a Stateside address to ship to - I have difficulty with the customs forms due to very bad eyesight; matter of fact I have a surgical appointment scheduled for 18 April where the eye surgeon will "peel" the membrane off of the retina - sounds worse than it really is. Anyway, I also require payment in U.S. dollars if you are an international buyer. Look for more of these "lots" shortly (after I recuperate from the eye surgery). No telling what I will find......
I woukld like to get in line for member Dan Habel. He has been looking for the shift selector plate. I will be in touch. Thanks, Brian
It appears that the lenses is included per the thread. I sent Dan an E-mail. I'm sure he will respond. If not I'll probably just buy the lot and pass it on to him. Thanks, brian
Buickman - sorry about that but I just found this stuff today and I am listing things as I find them. I think I may have another one of those shift things in annother box somewhere and I'll contact you when I find it..I am just totally disorganized here.
Thanks for the help Brian! I'm actually looking for the metal part of the selector (not just the lens), so I will pass. Thanks.
Just adding a portion of the page showing the parts of the antenna - the base, hexagon nut and lead wire are the parts offered in this lot. I am still looking for additional floor console parts that I know I have.....somewhere.
Buickman1967, are you in line? Thinking about breaking this lot down into individual parts so let me know. I was trying to avoid having to make four or five different shipments , thus I put this lot together.
Bot sure but I do believe the guy in front of you has "lost interest" so if that is the case I will break down the "lot" and we will go from there. The person ahead of you wanted to reserve the part for the console in the event his friend wanted it and I see that he does not. At this point I will announce that this "lot" is now on hold and Buickman1967 will get the console parts accordingly.
Hey Al just wondering if you might have the lower bulb housing that sits below the shift plate indicator??
I will have to look at the parts and chassis manuals to see what you are talking about. A long time ago I sold the console that these parts came from so that part may have gone with the console. I had more than one of these so you never know. While I have you on here let me know what you are willing to pay for the shift indicator and I will send it to the address I have on file for you in the States. Alan
The housing is what the lens and the black plate fit in to on the back side of the shifter plate. Should be light blue in colour and a hole in the center for the light bulb.
Motormite brand #85805 (5/8") socket is a DIRECT replacement. http://www.outdoorpros.com/Prod/Dor...ckets-Lighting-1-Wire-(2-Pack)/49403/Cat/1265
Buickman1967 - if you just need a 5/8 bulb socket I think I have several of these. I checked the link that BuickGS65 provided and it looks like a common bulb socket that is used for any lighting applications in almost any automobile. I'll try to locate one tomorrow. For some reason I thought you might have wanted the metal part that the bulb socket snaps into. I'll send you an email about all this shortly. Alan
