65 401 heat tube?

Discussion in ''Da Nailhead' started by Phil Racicot, Jul 21, 2004.

  1. Phil Racicot

    Phil Racicot Well-Known Member

    I'd like to know where to connect the other end of the tube that passes in the passenger side exhaust manifold and that conects under the choke coil.
    If someone has pictures, I'd appreciate it.
    Thanks
     
  2. LDPosse

    LDPosse Well-Known Member

    I'll see if I can get pics. Mine is broken off, but I remember how it ran when it was on there.

    Just curious, are you making a new one up out of some tubing? If so, what kind are you using?
     
  3. Phil Racicot

    Phil Racicot Well-Known Member

    I use 1/4" brake line.
     
  4. connects directly to the chock body.
     
  5. SpecialWagon65

    SpecialWagon65 Ted Nagel

    Hi Phil,
    Been busy travelling (UP of Michigan last week) trying to get your air cleaner off before the end of this week!

    The choke tube- there are 2 parts, one fresh cold clean air from the carb-its the 1/8th tube coming off the top of the carb - highest one on the carb, goes off the pass side rear corner top @ 45 angle. Filtered air, no vacuum or anything, attaches with a little pc of rubber hose. That goes to the manifold choke tube . The other side comes from the manifold choke tube and goes to the choke housing. Attaches to the housing with theaded fitting.

    I got a pair of these lines from Classic tube or inline tube, they had patterns for the Super Wildcat already, did not ask about the single 4bbl tubes.

    Regards,
     

Share This Page