Complete set of upper and lower QA1 tubular control arms for all 64-72 GM A Bodies. These were installed on a roller I bought and are not going to be used. They were installed 2-3 years on a frame which never saw anything other than sitting as the car never had a drivetrain. This set sells for $390 new from Summit and while they are not perfect, they have 0 miles on them and need nothing other than bolt in and go. $275 firm shipped in the lower 48 states
Vert.... sorry to say but I dont thing those are QA1 products.... compare them on their web page... They appear to be the ones that are all over the internet for about $300 new for the set. https://www.speedwaymotors.com/Spee...MIq7bKg76i1wIVg25-Ch3TzgTyEAQYAiABEgKZMfD_BwE Ebay... https://www.ebay.com/itm/1964-1972-...m2cbad41cbc:m:mGiWUg_H5Dwn0Yia7aR8S6w&vxp=mtr
Do you have the end links that come with them for sway bar mounting? I see the mounting tabs but no links
Those uppers don’t look like they are for the tall-spindle. If they are,I would be interested. I am converting the silver car to B-body spindles.
Unfortunately I do not know if they are for the tall spindles or not. Is there an easy identifier? I am working with very limited knowledge as these came on a roller I acquired and is being parted out. I do have the stabilizer end links which are not pictured. They are the adjustable end links.
Looking at Summit's website it appears these are the Summit brand control arms. While the Global West and Speedway link is similar, the Summit photos are arguably the same: Uppers: https://www.summitracing.com/parts/sum-770250 - $160.50/pair Lowers: https://www.atechmotorsports.com/parts/sum-770251 - $230.50/pair I am going to sell these for $275 shipped. If they don't sell I can use them on a project this winter.