everything was put on the car driven around the block and that is it, up for sale is a powdercoated body spindles(silver) drilled and smoothed to accept c5 brakes( adds 1 inch drop), Kore3 billet aluminum hubs(new but did installed on car 1 mile test drive), powder coated c5 brackets to accept c5 calipers calipers. GM c5 13" front rotors machined, all you need is c5 calipers. can change color of powdercoat if needed N/C $550.00 plus shipping Hotckis matching upper control arms Paid $600 2 miles on them $450 also have qa1 coilovers for sale $300.00 plus shipping PAGE 4 , 5 you can see the setup. can supply better pictures if intersted http://s917.photobucket.com/albums/ad19/66larkgs/66 skylark turbo nailhead/ $238.00 on ebay brand new for calipers zo6, http://www.ebay.com/itm/97-04-C5-GM...pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr i went to air ride and had to change upper and lower control arms to accept ridetech shockwaves.
nothing is damage, the kore3 hubs are like newand are 325mm and the c5 rotors are 325mm/13" rotors.the bearings and seals are like new and are all in great condition. i bought a complete ridetech shockwave setup so i had changed my control arms and spindles.My loss your gain.. Paul 66larkgs turbo401nailhead
Tried to PM you again, but your box is full. I think I'll have to pass. It'll be a while before I can swap to tubular arms, so I wont be able to use this setup as soon as I'd like. Good luck with your sale.
not a problem at all, i had to empty my mail box.. i had the spindle machined to accept stock lower and upper control arms. i run a stock lower control arms with these. You do not need to replace your control arms to run this setup Paul
Paul, "also have qa1 coilovers for sale $300.00 plus shipping" what model number,coil rate etc.. Thanks
part #GE401-11250A 1500-1700lbs 250springs. i paid $340, $300 and i will pay shipping, shocks are already assembled, and seen 1-2 miles on the road.. they are adjustable from normal height to 3" drop.
