I pulled these from a '67 Cutlass 2 door a few years back. From what I can tell they also work on the Buick Abody cars. Steering column firewall support plate/bracket setup + steering column mount bracket (holds the column to the dash metal structure). In very nice condition when pulled. 1) Steering column firewall support plate: I beadblasted it and painted it with a couple coats of good catalyzed epoxy primer. Install "as is" or scuff primer and paint w/your choice of bare steel look paints. The surfaces on the two plates/brackets were in superb condition....not rusty or pitted. Original mounting fasteners included - nice and have been beadblasted and phosphate plated (shiny appearace on the hardware is the oil applied by the plater). 2)Steering column mount bracket - also nice and clean but this piece is still in its original paint. $45 + shipping for both #1 and #2. PM for payment options.