I have a 63 w/cat with no keys. The ign is not locked so I can run it but need to get keys for it. Which locks are keyed the same? I have the trunk lock out of it and can get a key made for that. Does the trunk key also fit the doors and glove box and is the ign key different?
I've got one key for everything on my '62. Ignition switch, doors, glove box, and truck are all the same. I'd assume it would be the same for '63.
Hey Thanks for the replys and that is good news. I'll take the trunk lock to the locksmith and get a key made. If the ign hasn't been changed out sometime over the years I should be good to go.
If you figure the ignition tumblers are the original ones, you should just be able to go ito your GM dealer with the serial number get them to research the car and have one cut. I've done this with 3 of my older Buicks so far. Or, if you can remove the tumbler, the punch number will be on the lock cylinder. The trunk lock will have this same number on the cylinder. It should be a 4 digit number. You can use this number at a locksmith's or GM to get a set of keys cut.