same customer as cable - rust/corrosion problem on intake . i've got one ( 65 cat 401 ) i'm gonna take down to see if its close enough . let me know in case . close to lower mid state new york is better - oneonta/binghamton area . thanks for any info . del
yep - just checked 'em out side by side . '65 will fit but a few small dif's - front vac port not drilled , rear coil bracket holes located dif etc . his rusted/corroded on the bottom of one of the rear runners ?
so is the 4gc one the one that takes the spreadbore carb or the square like the one im trying to get rid of? http://www.v8buick.com/showthread.php?240377-64-65-401-intake-manifold&highlight=
dan : looks like my '65 intake . 4GC style - '66 was q-jet/spreadbore style . it's a really nice car so he may be lookin for a 63 for originality - but if not ?
I have a '63/401/JT/4GC carb. & manifold from a '63 Riv. for use with the DynaFlow trans. I'm sure the carb. will need to be gone through. $175.00 plus shipping. Or, you could come & pick it up & look at it on person.
tom : hi . just manifold a possibilty ? $ ? a pic of manifold possible ? thanks for any info . del ## edit ## what i'll do is take a quick drive down this afternoon after work , take pic , and post it here . that may be easier for ya in case its buried in the back of the garage or whatever . see how it match's .
Del, I'll look at the manifold in the am to make sure it's a match. I know it's from a '63 Riv. Just the manifold, because as far as I'm concerned the 4GC's are junk, $150.00 plus the shipping. Wish I had a camera, but the hardest part is how to use it. I don't want to waste my or anyone's time. Tom T. ---------- Post added at 12:38 AM ---------- Previous post was at 12:34 AM ---------- Another thought Del, how about the casting number?? Then we would know absolutely sure if they are the same.
tom : manifold number info is as follows : #353241 #2 #12-28 and - i was familiar with 35mm camera stuff , did some wedding photos , college class stuff - digital SEEMED too complicated - but its not , just more choices , and of course needed to help sell anything internet based . i dreaded getting one in a way but i just researched for a couple months and ordered a sony cyber shot . had it for maybe 4-5 years - easy , good pics , small enough to carry easily . the hardest part was the camera>computer connections and uploading etc . a 10 year old - no problem !
Del, sorry I haven't answered sooner. The manifold I have is not the casting number you posted. I believe there is a "1" in front of the 353241. I know I have another but will be awhile before I can get the time to dig it out. If you find something in the meantime go for it. Tom T.
no problem - and will let ya know if i do come across something else . but really if the one you have LOOKS like his ( coil mount/front vac port ) then it may not be a big enough concern for customer .
I've got this one. Some rust on outside, very slight bit of rust right under carb mounting, no significant rust in the runners, all threaded bolt holes are good. $80 plus the shipping. I'm in Wisconsin. View attachment 238121 View attachment 238122 View attachment 238123
jh olds : hi . no solid word back from tom yet . have notified customer on your info . maybe give me a shipping guesstimate to zip 13838 when possible . thanks . del
my customer and the car owner will probably look over pics and gameplan monday , i should hear from them soon . their main concern so far has been the problem area they now have - the casting weak spot/rust out under the manifold runner . will let ya know asap . postal money order or similar ok ? i'm just guessin thats what they may wanna use . thanks . del