560ci officially done

Its been a long time coming for many different reasons but its done,run and soon to be shipped home.
I flew up to the Twin Citys Mn to personally be involved with the dyno session at R&R Performance. JW had the engine there around 8am and it was bolted up and ready to run by 10. We made a total of 14 recorded pulls steadily making more power with each adjustment and change. First one came in at 663 / 670tq. Last pull was 707 tq @5300 and 793 hp @6500. This was without the vac pump operating correctly. Not sure its due to leaks or the pump is not pulling but it only did a best of -2.2 . with a correctly operating system it should pick up 20 hp.

 

That's great! I'm happy to see it come together.

Nice power numbers. That little Skyhawk should fly.

 

Ready for the Nationals?

 

It wont be there this year. On schedule with the RaSaber( RaceSabre) project to run in BSA.

 

You could paint that ‘Hawk corporate blue and put it in the RaSabre…
Patrick

By the way-what does the Skyhaek weigh?

 

Under 2000 lbs

 

There you go Denny Moore, maybe for old times sake you could work a deal with Steve and have a car to race!

 

That's a nice output there

 

if he wanted to fly down and put it together i'd not have a problem with that'

 

Nice!!!....34 deg timing and vacuum pump will definitely see 800+

 

Thinking that would be stretching the rules a bit.

 

She lost power at 34*. Picked up power at 32 and 30. added a cloverleaf spacer and got the last few HP. The pump will deff help

 

You're using a powerglide behind that, right?

 

Interesting....usually 34 is what aluminum heads like....was it maybe a little lean?

 

What is the combo briz ..looks like it's gonna be a fun ride

 

If he is still using the one that i had done, then yes, it is a Rossler powerglide.

 

I had my fun in that car, it is your turn. Happy to see it coming together for you.

 

That's good average power,...with a 4800 5k stall it will stroke good

 

Yes, have not done anything with the trans. Jim will get a converter put together for me.

 

13-13.2 across the board