I purchased this engine as a filler until my "big" motor was built from 10sec455 the details are as follows: Forged speedpro piston 9.4ish to 1 stock rods arp bolts throughout ported iron stg1 heads TA 510 cam and matching springs/retainers Erson pushrods Rollmaster Timing Set Deep pan/pickup SP1 intake 1050 dominator stock valve covers with tig welded spacers for factory look. Emptied HEI dist for msd box Oiling mods including external oil galley AN feed line (GREAT OIL PRESSURE) This engine I dropped in my 3100lb car and first time out untuned with a bad converter it ran a 10.70 and 10.69. That was in the heat and humidity of Salem before the rain came in. It would have probably put my car in the 10.20's in Cecil but that got rained out too. I only have 2 passes on this motor and it was in a street/strip car when Jeff had it so it is a proven piece and is truly a pump gas motor. $3500.00
Herb, Is this engine streetable or to radical to run on the street with power brakes and without headers?
Yes this is streetable I ran it on 93 octane at the track, I doubt the cam would support power brakes but check ta's web site for specifics on the cam. I don't know who built the engine it is someone that does Jeff's engines in Ct and has a proven track record. No flow numbers on the heads but they have to be pretty damn good to be putting down these numbers at the track. I will assist shipping in and out of the country but I do expect to be compensated if I have to built a crate or transport to a shipping depot. Docsgsx the engine currently some extras that I purchased after I bought it from Jeff that I will be removing so I don't want to mislead anyone with pics.(Sheet metal valve covers, spacer plate, headers, billet distributor, ect...) I will give everyone in the list 24 hours to commit and then move on to the next person. Thanks Guys
Paul or Chris haven't been online since I posted answers, I am waiting for there yes or no before its your turn Jay Bird. Thanks Herb
Sorry for taking so long to reply. I've been in my garage all day building a stage 2 motor. :laugh: I'll pass. Thanks