ready to cut the slot for the window to slide in.been awhile since I did the pass side,took the measurements from the pass side this eve,i believe it is about the same for each side.i'll take pics of the slot after I cut.i put rubber door edge guard around the driver side slot I cut,to be sure not to scratch the new glass.made a pattern and had a local glass shop cut the glass,no tint.door edge guard on pass side,its been a long day.also on the shocks I used for the rear,they're 56 buick special shocks.i had vw shocks on for awhile then put the buick shocks on later.the ride didn't change,the vw shocks were flipped upside down.