I am going to make a quick and dirty add just to see if anyone is interested and if they are I will post some pictures and more details. The crank is a stock crank that has been hand profiled and de-burred to increase strength and reduce wind age, It has also been military spec shot-penned to also help the strength of the crank. The crank was then off set ground to add stroke to the engine. The rods are alum. grp's and are in great shape, the pistons are Ross and would be 14-15 to 1 depending on the cc of the head and deck height of the block. All the parts are located in St. Louis and have 10 runs on them and are in good shape. I am asking 2600 plus shipping. OBO If you are interested let me know and I will post more details Thanks for looking, Gary
Gary, Would you be interested in sending the assembly ? I would like to Mag the crank & measure the rods & pistons .. I will pay the shipping Nick
It was balanced together, but I do not have the flex plate and stuff so you would have to spin it with whatever you were using but it should not require much work to get it dead on again
