455 Camshaft Bolts

Discussion in 'Street/strip 400/430/455' started by Tony, Oct 12, 2004.

  1. Tony

    Tony Well-Known Member

    I have a 455 and want to replace the bolts that hold the timing chain gear to the camshaft. Are there special bolts out there that I have to use or can I just use a "grade five" bolt that I can get from the hardware store?
    Any thoughts? :Do No:
    Tony
     
    Tony, Oct 12, 2004
    #1
  2. GS464

    GS464 Hopelessly Addicted

    Just one thought: Spend the money for the best bolts you can put in it. The difference in price can't be THAT much. Cheap insurance.
     
    GS464, Oct 12, 2004
    #2
  3. John Eberly

    John Eberly Well-Known Member

    Camshaft Bolts

    I think I've got grade 8 "Hardware Store" bolts in mine. Make sure you match the length to the old bolts - too long is bad news. Use a good grade of Locktite.
     
    John Eberly, Oct 13, 2004
    #3
  4. jimmy

    jimmy Low-Tech Dinosaur

    I've done the same as John and never had a problem.
     
    jimmy, Oct 13, 2004
    #4
  5. BirdDog

    BirdDog Well-Known Member

    Grade 8 is never a bad idea.....But the bolt length and the use of "Locktite" are very important. :Smarty:

    :TU:
     
    BirdDog, Oct 13, 2004
    #5

Share This Page