Again silly nailhead newbie question. Looking to run TBI but most after market ones require a 4150 style manifold, there are ones that do fit a 2bbl manifold but not the greatest on the market Anyone got any hints for a 4150 style intake on a 364
I run a 4150 holley on my 401 intake. I just use a 1/2 inch adaptor. Made it into a open plenum with the doc mod and it works great. The adaptor might work on TBI.
You will need a 364 intake for a 4 barrel carb... and then modify it some what....the bolt pattern for holleys and holley clones require a adapter be made... I make mine from rolled steel, 3/8 or so thick, that way the adapter doubles as a adapter /heat shield....while you are setting it up,,, you might as well do the old Doc dual plane mod.. and make the adapter match the intake manifold.... cheap to do and well worth the effort....but you will have to start with a base 364 intake because of the deck height factor.... the heads are closer together on a 364 than a 401/425....
