I'm abandoning my project of a BBB in my car so the following is for sale. First let me state that all prices do not include shipping. However, I can bring any or all of it to BG in a couple weeks. In addition, if you see any two or several items you want I can pack them together to save some shipping costs. Lastly, if you see a bunch of it you want I'd be willing to bend a little on a package deal. 1) Complete `67 430 motor. Reportedly 65,000 miles but I can't veryify that. Has big port heads and the exhaust manifolds. $300 2) `73 455 block, std. bore $100 SOLD 3) `76 455 block, std. bore, cleaned, new freeze plugs and pressure tested $175 SOLD 4) Crank core, needs turned $20 SOLD 5) Fresh .010/.010 crank $100 SOLD 6) Used 455 stock pistons and rods, two rods need to be reconditioned $20 SOLD 7) NOS 455 pistons, rods, and rings, std. $125SOLD 8) Wiseco pistons and H-beam rods. Here's link http://www.v8buick.com/showthread.php?t=224759&highlight=wiseco I paid $370 with the shipping so I just want to get my money back, so $370 plus shipping. I did speak with Mike at AMP. He no longer sells that particular rod but he can duplicate them with an Eagle rod. SOLD 9) Used Comp cam, cam card attached $65 SOLD 10) New 455 Johnson lifters $60 SOLD 11) New stage 1 springs $60 SOLD 12) Edelbrock Performer intake. New, never installed $200 SOLD 13) Rollmaster timing set $75 SOLD 14) New Federal Mogul .010/.010 rod and main bearings $60 SOLD 15) Stage 1 valves, used w/1 new intake and 1 extra new exhaust valve. Used ones are good but you will need 1 more intake for a complete useable set $60 SOLD 16) New, not rebuilt, Carquest water pump $50 SOLD 17) Felpro gasket set, new but missing the exhaust manifold gaskets $40 SOLD 18) Felpro intake/valley pan gasket, new $20 SOLD 19) Pair of `73 heads, complete $40 SOLD 20) Windage tray, stock, used $5 SOLD 21) `68-`69 400-430 valve covers, nice, no dents $40 SOLD 22) Oil pan, bead blasted, a couple dents repaired, urethane primer. Needs to be wet sanded and painted $50 SOLD 23) 5/8" pickup tube $20 SOLD 24) Good useable used 455 timing cover $50 SOLD 25)`73 800cfm carb 7043240, recent rebuilt kit, painted with carb color paint. Works great, used for a short time on a Pontiac $75 SOLD 26) Starter heat shield, bead blasted and painted gray hi-temp $5 SOLD 27) Flex plate $15 28) Original timing cover and water pump bolt set $20 SOLD 29) Lower 3 groove pulley 1375143, bead blasted and primed, has pitting in grooves $20 SOLD 30) Upper pulley 1375146, bead blasted and primed, nice $20 SOLD 31) Dipstick and tube. I think this came out of the `74 455 $20 SOLD 32) `71 distributor 1112104 6E10 $20 SOLD 33) Oil slinger and crank bolt $10 SOLD 34) 2 sets of rocker arms and shafts, probably need both to make one good set $10 SOLD 35) Replated 2 groove alternator pulley, nut, washer $20 SOLD 36) Valve cover bolts and retainers w/studs, cad plated, 2 sets, $10 per set SOLD 37) misc. engine bolts and brackets, some have been plated.....ask ? I'm probably forgetting some stuff but just ask and I'll look. Here are some pics. More available upon request.
Who built the carb and what was used? Man do you have allot of stuff! What changed your mind? Are the stage 1 springs the same for a 350? Scott
Bill, I was wondering if you could find a UPS or post office and ship from BG whenever you get there to help cut shipping cost? Lol, kidding. interested in the 10-10 or the core crank. I'll pm more. Thanks, John.
I got the carb with one of the engines. It had been rebuilt years ago and the guy told me it was a great carb but had been sitting for 14 years so I assumed it needed a kit so I bought one. I took it apart and was amazed at how clean it still was but I put the kit and a new float in because, what the heck, I had already had it. I used it on a Pontiac 400 for short time and it appears to work just fine, no leaks. I don't know if the springs are the same for a 350. Perhaps someone else will chime in on this. I kinda hate to admit it here but I want to go with an LS motor next. What I really want to do is turbocharge one.
All kidding aside, I am meeting a guy from Rockford, IL in BG to deliver a GTO I just restored for him. If it will help I can take parts along and give them to him to ship from Rockford. Might save a few bucks.
Ok Briz, you're first on the timing cover. Here's a better shot of the three throttle cable brackets that are plated, and I'm not even sure which one goes to what engine. I have other misc. brackets but none are replated.
I was thinking of Alt, Power steering, A/C type brackets in Chrome. My Riv does not use that type of throtle cable brackets. Sorry for the confusion. Id still like the timing cover and oil pan if it comes my way.
