350 ported heads,pistons, rods,etc engine parts

Hi guys,what I have here is parts lot of 69 Buick 350 engine parts,basically everything except the crank and block.
In the early 90's I had a 76 Skylark that I used to race and had built a pretty decent running Buick 350 that used to run well for a small block buick.The car ened up running 12.70's @ 107 with 3:73's.Was then put into my friends lighter 78 Regal and with only a gear change to 3:90's and a Barrry Grant carb ended up running 12.40's @109.Was told by many that was a very good time for a 350 Buick.
My cousin who used to race and worked at a machine shop did all the work for me,it was a 69 Buick 350,set up with 7-8 thou piston to wall(so it was loose) and also loose on the bearings.He did the porting and polishing on the heads,opened up and put in the SS valves from T/A.Balanced the bottom end,shot peened the rods,etc.
Mike from T/A would probably remember me as he custom ground the cam for this engine as it is still here right now.I don't remember the specs,but I think it was around 484",473".The cam is stamped T/A 2.29 108 hyd if it can be traced back.
The valve springs were also T/A with a dampener.I don't rember if the stretched pan was from T/A,Kenne Bell,or Poston.The cast valve covers are Postons.
The engine was disassembled for re-ring and bearing and never went back together.It was passed thru another friend who now dropped it all off at my house and said do what you want with it.Unfortunately the block had to much rust on the cylinder walls now and being .030 over already and set up loose,was not savable,as well as the crank that was 10/10 under also had to much rust on the journals.
However,the TRW 22329 .030 forged pistons are still in great and usable shape as well as the rods that were balanced and shot peened.
There is also a,looks to be brand new and never run,a Comp Cam 268H camshaft.
This is what I see that is in the parts lot that I have:
1. 69 350 heads ported/polished w/rockers $400 SOLD !!!!!!
1a. 2232p .030 forged pistons with shot peened + balanced rods 200 SOLD !




3. stock pushrods and T/A 3/8 moly pushrods 40 SOLD !
4. stretched oil pan and pickup tube 50 SOLD !
5. 108 T/A cam 25
6. 268 Comp cam brand new 50
7. timing chain,dist gear,and fuel pump cam,and oil slinger 25
8. Mallory Unilite distributor,but is missing the module inside 40
9. timing cover w/high volume spacer,and water pump 50 SOLD !
10. harmonic balancer 20
11. crank underdrive pulley 20 SOLD !
12. water pump pulley = goes with timing cover SOLD !
13. Alt brackets = goes with timing cover SOLD !
14. dipstick tube 10
15. Poston cast alum valve covers 50 SOLD !
16. flywheel 20

total $ 1,000.00
17. and not pictured are all the engine bolts,head bolts,intake,timing cover,flywheel,etc and more.

I really do not want to ship all this,would hope that someone would be interested to take everything and come pick it up,so am not interested in parting out just yet.

I thought I itemized these parts and priced fairly,again not wanting to ship,would like somone to buy all,I'm in central Ct,10 min from Hartford.

 

More pics....

 

Also,these parts are in central Ct.

 

Interested in Forged pistons, if it gets to splitting it up.

 

Interested in oil pan & pickup tube, under drive crank pulley, timing chain if ajd., and 3/8 pushrods, and valve covers...

thanks jerrold,..

 

Before a Mod gets to this thread, U might want to put up a price......

 

might be interested in the heads depending on price..

 

I edited it with prices on each item that I think is/was fair to make a package deal.

 

My $200.00 is waiting for the pistons. :grin: Looks like you have a good start on brooming some of it! :TU:

 

No problem,if nobody steps up soon for the whole thing,it's gonna get split.

 

intrested in heads was it a complete valve job when heads were ported

 

how old is the flywheel? any cracks? good condition? closer pics?

Scott

 

Will check it out for you Scott.

 

Interested in the heads, rockers and oil pan and tube..

 

I'll give it a day or two more for someone to come buy all,if not,will have to find and get the items boxed for shipping and estimate,and those who spoke about the parts they were interested will be pm'd by their place in line of mentioning what they wanted.Thank you

 

Hi, Interested in the mallory distributor.Would like to purchase. JOE

 

O.k,I tried, being split up.All parts are price +actual shipping thru fedex or US postal if can.

Mart is first in line for the pistons

436'd Skylark in line first on the heads,will have to find boxes for them that are sturdy enough.

J.Staged in line for the oil pan and pickup

joecool for the Mallory dist

---------- Post added at 12:33 PM ---------- Previous post was at 12:27 PM ----------

All of you first in line have PM's,thanks,Paul

 

Wrap the heads in carpet scraps with duct tape...

 

Paul ,..I would be interested in the timing cover with all the accs. as you stated,...although I really just need the alt. brackets seperate if you would sell them that way..

thanks, jerrold,,

 

Good idea, if that's ok way to ship. Two padded HEAVY lumps! :laugh: