Recently got a 69 GS California. Noticed that one of the plates for the ram air is missing a screw. Anyone have one or know the exact size?
Take one out and look at it for proper match. I know what 70-72 look like but not sure if yours is same.
Also if one is missing the hole is most likely stripped out. You can stuff hole with epoxy and maybe get screw in when part dry.
Did that with mine! put 2- part epoxy in holes try to help it. but I failed. kinda didn't work . I'm jacked
Thanks. Thats what I'm going to do take one out of the other one and see if I have a match if not run to the hardware store. Good tip about the epoxy. I've had pretty good luck wrapping the same tape you wrap on the threads of a gas fittings in the house.