collected these awhile back to use but i am going ( a little ) milder with my engine combo so not needed . ---------------------------------------------- used crower solid cam , 350 , #E40400 . looks nice . lifter box sez #66950 (box marked) duration - 279 - 283 lift - 554 - 565 4 degrees advance ground into cam lobe seperation 108 Check spec sheet pic info i think i paid $150 from a V8B member so same plus shipping --------------------------------------------- Used ATi balancer marked - #916100 restamped to 916520 ( does come up as buick 350 ) / 916280 #916210 ( hub ) same , bought from a V8B member . $150 i think . so same deal . plus shipping .
when i researched the numbers stamped on the balancer it came up "buick 350" . and when i measured balancer bore and lined up keyway slot seems good . and bought from V8B board member - stated it was for a 350 .
Do you know if the car was ran with the cam or what kind of power it had. I am putting in a Schneider cam that is close to that one.
i have never run the cam . bought it used (with lifters in order) from a V8B member , but i can't remember who that was right off .
