I'm going to put a 455 with a th400 in my 66 skylark and need a shorter drive shaft and new yoke to put in. So if you have one can you send pix and a price shipped to stockton, ca 95205.
All you need is to find a machine shop that will cut weld and rebalance yours. It can be done for around $100 at most shops. And then you know its right.
angmonique Hi,I have a 400 yoke.Why do you need a picture?I want $30.00 plus shipping. Thats the short one.BrunoD.
Just so you know there are 2 different size TH400 yokes. One is about 1 5/8 and the other is about 1 7/8.
GStage1 Hi G,67 was the smaller yoke.In general those are very hard to come by.They also had a different yoke for the th375.Usually,if anybody ask for a 400 yoke the one they want is the 1 7/8.BrunoD.
