I purchased a finned valley cover, but it does not have the opening for the air scavenging tube that the orginal had. How do i duplicate this ventilation? I thought i read an article or two out on the web, but now that i am ready, i can't seem to find any information. (I am also using offy finned valve covers, with a brather on one side.)
Ok, is nobody answering because they are busy, or was this just a stupid question ou: ? I also purchased a offy 3X2 intake. IT appears to have a "port" for re-using gases of such nature. Do i just drill a hole in the valve cover or valley cover, and connect a pcv valve from that hole to the port? The intake has a small port, which i assume is for vaccum to the distributor, and 1 larger port that i am more or less guessing at. Just when you think you have stuff figured out, something comes up o No:
Indy I have a 322 that came out of Calif. and it has a pvc system added. They took the original opening and added pvc valve that runs to a tube drilled and tapped into the intake manifold behind the carb. See attachment. Judd