300 Buildup

Discussion in 'Small Block Tech' started by rickli, May 5, 2007.

  1. rickli

    rickli Well-Known Member

    This is some of what you can do with these 300,s This is a stock 58k 4V 300 except for high volume oil pump and electric fans, 625cfm Road Demon carb, Mr. Gasket Street Scoop, headers w Flowmasters, full MSD ignition w/ distributer, 110 amp altenator, etc. The car itself has a full heavy duty suspension w/ 1" drop Hotchkis springs, big thick sway bars, disc brakes, Edelbrock IAS shocks and rear upper and lower contral arms. This car is Fast and Tight. Enjoy, Rick
     

    Attached Files:

  2. NixVegaGT

    NixVegaGT Well-Known Member

    THat's pretty hot, Rick. How does the MSD work? Is it no points? I've never looked at them. Thanks man.
     
  3. rickli

    rickli Well-Known Member

    Nix,
    yes it's is a billit aluminum pointless distributor with 8.5 m wires, Blaster coil and 6A ignition box which altogether produces a more complete spark and greater burn off of all the gasoline in the cumbustion chamber at each moment. It gives you a "little more" power but it creates a much more efficient engine, I get very good gas miliage with this system, much better than stock.
    Later,
    Rick
     

Share This Page