My oil pressure is very low at idle, so I called D&D and purchased a high volume OP kit. Today, I dismantled the front half of the motor and installed the oil pump kit. I reassembled everything and the gears won't spin.....at all. I checked and rechecked everything and never could I.D. where I messed up. Any insight? I plan on call D&D in the morning. Any advice at what I might have done wrong?
http://www.v8buick.com/showthread.p...ance-problem&highlight=oil+pump+end+clearance http://www.taperformance.com/proddetail.asp?prod=TA_1704
