2 Buick 215 V8s/ 2 T-50 Transmissions/ tons of extra parts

Discussion in 'Parts for sale' started by Jgraser90, Mar 7, 2018.

  1. Jgraser90

    Jgraser90 New Member

    Have for sale 2 Buick 215 Aluminum V8s and 2 aluminum T50 5 speed transmissions in Tucson, AZ

    One of the engines/ transmissions is currently in a vehicle running a driving.

    Engine in the car has ported heads, aftermarket cam (unknown make/ specs), brand new pertronix flamethrower 3 billet distributor and coil set up with brand new Accel wires. Brand New power master 150 amp alternator. Fresh plugs, fresh thermostat, new rear main seal/ intake manifold gaskets/ valve cover gaskets/ oil pan gasket. All other engine gaskets will be included brand new in packaging. Carter 400 CFM 4 barrel carb just rebuilt, and added aluminum/ phenolic carb spacer. Engine runs strong gets me anywhere I need to go without issue. Transmission shifts smooth through every gear, no grinds. Will show video of engine running/ car driving if necessary.

    Extra engine is taken apart, have all internals, probably need to be cleaned up and re-ringed. Have 2 Buick 215 Cranks and one Buick 300 Crank, 2 sets of 215 heads and a set of 300 heads, extra exhaust manifolds, extra intake manifolds, valvetrain/ accessories/ cams/ brackets/ starters/ alternators, everything you would need to have a whole extra engine/ trans setup ready to drop in at a moment's notice once put back together.


    I have close to $1000 invested just in the new parts alone. Going a different route with my build so it's time for this stuff to go. Asking $1200 for everything, or $900 without pertronix/ new alternator. I have no idea truthfully what all this is worth so I'm open to reasonable offers. More pictures available upon request. I have this stuff listed locally and on other forums as well so it may sell somewhere other than here.

    IMG_20180224_122633_269.jpg
     

    Attached Files:

    Harlockssx likes this.
  2. regal81455

    regal81455 Well-Known Member

    If only you weren't in AZ....

    Are the 300 heads aluminum?
     
  3. Jgraser90

    Jgraser90 New Member

    Yes sir
     
  4. regal81455

    regal81455 Well-Known Member

    Would you part with them and ship? Maybe via Fastenal's freight? Could be interested in the 300 crank as well. Shoot me a PM with price and let's talk.
     
  5. justalark

    justalark Silver Level contributor

    I might be interested in the running engine only, do you have price for it alone?
     

Share This Page