If any youns happen to have a 2 barrel laying around, such as if you swapped from a 2 barrel to a 4 barrel setup, and just don't have no use for this part, then I would be very appreciative of it. I need a brake line(or just the brass fitting will do even) that goes from the master cylinder/brake booster from a rubber hose that goes into the intake, and is screwed into the intake by a brass fitting.(sorta like a bolt but is built onto the brake line) Important:THIS MUST BE FOR A 2 BARREL ONLY, 4 barrel lines/fittings will not work as they are too big. The engine I need it for is a '70 buick 350/2 barrel, but im sure any old Buick 350 w/ a 2 barrel brake line will work. :TU: Just list the asking price and we'll see what we can work out. :Comp: Thanks :bglasses: Edit:to add to the description of this part, it is a metal line that screws into the intake by a brass fitting, and then goes from the intake up into a rubber hose which then leads into the master cylinder. Just a little verification. :TU:
Cody, Check out the post "Better Air", here in Parts Wanted! He wants to get rid of his 350-2 intake, for a 4bbl! You might want to ask him what he's going to do with the 2bbl intake, for the parts that you're looking for, if no one else has one... o No:
I looked and did not find one,I know of two 70 Skylarks in a junk yard and I do know one has power brakes, but you will have to wait till next weekend.
Ok Engie, thanks for looking. Also I would appreciate it if you did look in the junkyard at those 2 '70 larks to see if they still have that part, just remember that they must be 2 barrel cars, because 4 barrels are just waaayyy too big. :Smarty: Thanks, :TU:
fitting I have all the parts from the 2 bbl setup I had on my 71 lark in a box out in the garage I'll see if I can get a pic or two of the fittings I have. If I've got what you need pay postage and its yours. I must be a pack rat, I havent had that car for more than 15 years.......... Jon
Jon, that would be great! That's a deal I can't refuse. I guess sometimes it's good to be a pack-rat, especially when it comes to cars like these, because people are always looking for certain parts all the time! Thanks! :TU:
Bill, believe it or not, it has been up in the lower 100's here in temperature for the past few days, and I have not even wanted to step foot out of the house since. :spank: This morning I was hoping to go out in the garage and take my exhaust off and at least get my ignition coil under my latch on the dist. cap, but noooooooo, the coil I bought came w/ everything but the center piece needed to go in the middle of the little rubber donut! :rant: I really shouldn't rant about it, as I still got plenty of time and I am in no grand rush as of now, although time isn't going to be on my side much longer! I'll see if I can get a pic of it as soon as possible, hopefully sometime this morning or later on today. o No: Maybe Jon/Engie can help me out if they have/or can find the part! :TU:
