1975 Buick 350 Block and Crank

Discussion in 'Parts for sale' started by Tony Rossini, May 22, 2019.

  1. Tony Rossini

    Tony Rossini Well-Known Member

    I have a 75 Buick 350 Block and crank. Was a running motor when I disassembled it. $75 for both. Pick up only in Masontown, Pa. I can deliver to the Buick race at Quakercity in three weeks.
    Thanks, Tony
  2. Gallagher

    Gallagher Founders Club Member

    I'll look at this again in a couple weeks once I know what I'll be driving out there.
    Not in line yet. Just an old school tag.
  3. will it fit a 1969 skylark gs mine frozen got pistons too thanks email me my57nomad1@outlook.com or call 814-730-7957 most anytime. where you located
  4. Tony Rossini

    Tony Rossini Well-Known Member

    Sorry but I scrapped it bc I couldn't even give it away.
  5. 1972Mach1

    1972Mach1 Just some guy.....

    Andrew, maybe put an ad down in the "Parts Wanted" section. Seems like there's a lot of guys with 350s sitting around that they can't get rid of, so you'll probably get quite a few responses if you do that so everyone knows you're looking for one.
  6. Tom Righter

    Tom Righter Well-Known Member

    I have a 70 2 barrel complete, ran great when pulled. Come get it.
  7. where you at. New York ,Pa. Ohio what comes with it all bracket? need powersteer brackets thanks andy
  8. Tom Righter

    Tom Righter Well-Known Member

    Green Lane, Pennsylvania.the power steering brackets are not on the engine.Carb to pan otherwise,exhaust manifolds

Share This Page