Im looking for the following original parts to make my 73 LeSabre whole. BODY 6" of that white front bumper cushion insert material. I have a gap there for some reason and it bugs me. 1 waffle piece for front RH wheelhouse 1 lower grill INTERIOR 1 passenger side dash insert with a/c vents 1 RH seat belt bolt cover, black. (on the driveshaft tunnel for the front seat belts) 1 brake pedal cover with chrome trim 1 black/chrome tip for heater controls ENGINE BAY 1 7 blade clutch fan setup ( 7 blade fan with clutch, double or single groove pulley, spacer) 1 harrison 3 core radiator with the 4 rubber insulators 1 original un-cut pump to carb fuel pipe for 350 (may be the same as 455) 1 harrison heater core 1 unbent power steering pump pulley #1235776 ######################### Thank You Gary
Gary just answered your message. I do also have access to this 73 Le Sabre, kind of beat up, but it might have RH turn signal / marker housing in usable shape, and a lower grille that is okay. It should still have the heater core as well.
Took additional pics of 73 Le Sabre yesterday. RH park/marker light - No. Lower grille - No. Upper trunk gutter - No. Rear window channel - No. It does have a heater core in place, and the trunk floor pan area is good.
I have to clean up my trunk pan and see exactly what pieces and sizes I need. The left side is fine, its only the right side of the trunk pan thats bad and only in certain spots. Do you have another 73 with good trunk channel and back window corners? Thanks Gary
the 73 Electra - in the W. El Paso yard, but it is 35-40 miles from my residence and car requires a good mile hike to reach it - way back in rear of yard. It may? still have a usable RF marker, i remember looking at it when the car first came in. It does have good trunk gutter, rear window channel, and trunk floor.
