1973 Century rocker moldings

I need both rocker moldings for a 1973 Century. These are the ones on the actual rockers, not the ones on the door, fender, and quarter. Thanks, Jeff

 

HI,I have one set that's longer then the GS rocker molding,these is the 3 inch wide molding.Just tell me the approximate length that you need,I'll let you know if mine will fit.The ones I have are in very good condition.Bruno.

 

Mine are only about 1" wide with about a 1/2 " finished portion. These moldings are vehicle specific. Thanks

 

This is a '75. Vehicle is long gone, but it may? have had the same mouldings from 73 through 75. I would contact user "Rich Johns" he knows a lot about these models.

 

http://www.ecklerschevelle.com/chevelle-door-sill-plates-two-door-1973-1977.html

These folks have sill plate for a 73 Chevelle. I expect that they are the same. Might try them and see. They may have the rocker molding you need. Good luck.