Calling all 1972 Skylark "350's" Does anyone know the exact location/position of the 350 emblem on the 1972 Skylark 350. I know the emblem goes on the rear quarter panel below the word Skylark. Not sure under what letters or how much space is there between the two emblems Skylark/350? Any pictures or information would be greatly appreciated. Thanks, AL
I have my emblems off, so I measured the spacing. If you take the Skylark off, the 350 holes are 7/8" down and 1 1/8" to the right of the center Skylark mounting hole (measured from the center of the hole). It's about in the middle of the "loop" in the "a" in Skylark. Drill diameter is 9/32", the other hole is 2 7/16" to the right of the first hole. If you don't have the Skylark off measure down 3/4" for hole location. Drivers side will be towards the rear, passenger side will be towards the front.
