1972 coil springs

Discussion in 'Parts for sale' started by johan74, Mar 3, 2009.

  1. johan74

    johan74 Active Member

    I have a set of stock front and rear coil springs that are for 1972 skylark with a small block. They have maybe 1000 miles on them before I started a frame off resto what was I thinking LMAO. So they are pretty much new. Anyway i'm going with a Hotchkis tvs package and do not need these anymore. It will be a week before the car gets back from the blasting shop and they can be removed. Also changing the upper a arms and all the stock front drum and sway bar setup so they will available as well. The set is two hundred with tax at my local parts house so looking to get a hundred out of them plus shipping. As for the other stuff I wouldn't know how to price or if anyone would even want them. Just let me know Thanks John.
     
  2. CJB72Skylark

    CJB72Skylark Moderator

    First in line.

    What shape are the control arms in more importantly the bushings...
     
  3. johan74

    johan74 Active Member

    I'm pretty sure that I replaced the ball joints "its been seven years" but the bushings need replaced if anyone wants the bushings replaced I have a local shop that can replace them for the cost of bushings also all the parts listed in the post except the front sway bar can be powder coated by a friend of mine very reasonable before shipping. My cell is 512-581-8793 if anyone interested would like to call to work out the particulars.
     
  4. CJB72Skylark

    CJB72Skylark Moderator

    I still want first shot at all this, give me a few hours to chew it over and Ill give you a call when I get home from work.
     
  5. johan74

    johan74 Active Member

    No prob your first in line.
     
  6. CJB72Skylark

    CJB72Skylark Moderator

    If you would get a quote for the bushings as well as the powedercoating for the control arms only. I have zero use for any of the drum parts or sway bar, so instead of adding shipping weight- just throw that stuff away or try to sell it on here.
     
  7. johan74

    johan74 Active Member

    I will. Going to work soon so just give me a call later. also you want the springs and control arms right?
     
  8. CJB72Skylark

    CJB72Skylark Moderator

    I dont need the springs, but if you will only sell them as a package deal I would take them. If you could sell the springs seperate to someone else it would probably benefit us both.
     
  9. johan74

    johan74 Active Member

    If anyone is interested in the springs I can have them powder coated when my frame gets coated. They are going to give me a package deal for all the stuff I'm having done so whatever they add for the springs is what the cost will be. Cant be more than 20 or 30 bucks. Again these springs maybe have a thousand miles on them before I parked the car in 02.
     
  10. techg8

    techg8 The BS GS

    I would like to see pics please, not powdercoated.
     
  11. johan74

    johan74 Active Member

    The car is at the blasting place and I wont get it back till next week or so. As far as pics there just stock moog coil front and rear coil springs. I can post some when I get it back.
     
  12. lowflyer

    lowflyer Well-Known Member

    Are the springs for a SBB with Air? or without. or does it make a difference? I am interested in just the front set, with shipping to Champaign, IL 61822. Thanks.
     
  13. techg8

    techg8 The BS GS

    I will pull myself out of line thanks.
     

Share This Page