I have the following parts for sale, I would prefer to unload the whole thing as one lot. 1972 455 Heads, disassembled. The valves, springs, retainers and keepers are all stored in separate, labelled boxes. I bought these in 2003 from Mike Pesarchick, I think he had pulled them off of a stock engine. I had them tanked and assembled with new valves and springs at a local machine shop. I ran these heads on a motor for about 2 years in my 1985 C20 pickup, which I drove to the 1st annual BPG nats. The springs came with the camshaft, which is from Straightline Performance, they are 135lb seat and 300lb open pressure. I do not have the rocker arms for these heads. A pic of the cam card is listed below. The lifters are labelled as to which lobe they were run on. I have a set of '72 455 rods with KB 9:1 hyper pistons attached. They were in the truck motor, have about 10,000 miles on them. Also included is a set of rods out of a '72 big car 455, picked from Harry's-u-pull-it circa 1999. They were tanked at the machine shop and have been sitting on the shelf ever since. I'd like to unload the whole lot for $100 plus shipping from 17033. I can deliver locally. Thanks!
2nd can arrange pick up this weekend if available. ---------- Post added at 01:28 PM ---------- Previous post was at 01:26 PM ---------- PM me if I am up.
