Hello, Restoring a 70 Riviera - need a picture of the rear exhaust resonators and brackets! Mine were missing from the car and I am replacing the entire system with the stock set up. Just not sure what the rear hangar set up is supposed to look like! Thanks in advance for any pictures! David
Check the shop manual. I believe there should be a pic. A flat metal plate with two holes is welded to the resonator outlet down pipe (originally) at proper angle. The hanger has two rubber strips that hang down and bolt to the flat plate. Rubbers are riveted to the hanger bracket at other end. The hanger attaches to frame with a 1/2" head sheet metal screw and one of the bumper bracket bolts. If you have an original hanger you can fabricate the plate.
Check Waldron for reproduction exhaust pipes. http://waldronexhaust.com/cart/index.php?main_page=product_info&cPath=61_31_386&products_id=4000
Thank you all for the very quick response!! That is the information I have been searching for! Regards, David
