1970 GS resto parts

Discussion in 'Chassis restoration' started by gsxnut, Mar 9, 2007.

  1. gsxnut

    gsxnut Well-Known Member

    Does anyone know if the following parts are avaliable.

    Orginal style A/C lines
    Headlight adjusting nuts (go in the core support and the adjust screw screws into this)
    Condensing unit bottom mounting insulators
    Condendsing unit upper support rubber bushings.

    Thanks

    Mark
     
  2. NSBound

    NSBound Well-Known Member

  3. gsxnut

    gsxnut Well-Known Member

    Nope. I did see those. I am looking for the metal T looking inserts that the headlight adjustabling bolts screw into.

    Mark
     
  4. Racerx88

    Racerx88 Platinum Level Contributor

  5. gsxnut

    gsxnut Well-Known Member

    Bingo on those. Awesome. thanks for the help. any help on the other parts? I tried Ebay but for some reason did not get this to come up.
     
  6. GStage1

    GStage1 Always looking for parts!

    AC condensor parts are not repro'd.

    There are no lower bushings...there are just two small rubber boots/sleeves that slide over the core support tabs.

    Email me direct...I may have some spares.

    GStage1@buickperformance.com
     
  7. fast-gs

    fast-gs what to do now?

    there is condensor lower mounting insulators, the rubber sleeves are for the fan shroud. the lower condensor insulators are a plasti-dipped c shaped metal clip. no one repos them, but if you have the originals they are very easy to restore. all gm a bodys with ac had them. they are not a buick only part.
     
  8. dreeesh

    dreeesh Well-Known Member

    the headlight adjusting nuts can be bought at your local auto parts store in the "HELP" aisle.
     
  9. gsxnut

    gsxnut Well-Known Member

    Thanks for all the help. I did go to the parts store and got a universal headlight adjusting screw but the hole is too big on the core support so it falls out.

    I do not have the plastic dipped C clips but it is what I am looking for. I will got to a junk yard and start looking unless someone has a pair they want to sell.

    I also found out I need the plastic guards in the front inner fenders for a 1970 GS. I am sure I i will have to find a used part for those too.

    Mark
     
  10. copperheadgs1

    copperheadgs1 copperheadgs1

  11. GStage1

    GStage1 Always looking for parts!

    Classic does all my lines and he does excellent work. He is a good friend of mine so you will not be disappointed!
     
  12. n2buick

    n2buick Well-Known Member

    Mark, I'm pretty sure I have the plastic guards.
    I'll try to dig them out and check the condition.
    Give me a call this weekend.

    Jeff
     

Share This Page