I took a look around the dash today and did not see any visable screws. Is there an easy way to remove the dash? Looking at salvaging the cluster and few other things. ThanX Frank
Look for 1/2" hex head screws at the base of the dash. Also, you will need to remove the glove box to access the back of the dash pad to remove the screws. Once removed you can get take apart everything else. If you are going to do this in the future...buy a Buick shop manual and it will show all screws.
GStage1, ThanX, I will check for the hex, Must have been blind yesterday while stripping the car down. Frank
If it's like the one I just took out you'll have to wait for dark. Those dam wasps living above the glove box get kinda upset when you disturb them.:shock: ou: Bruce
ThanX for the warning. Haven't seen any buzzing around the inside, just a few big 8 leggers. :shock: These days I'm watchfull for those wasps/hornets since dropping from a latter while cleaning my eavestrough. Almost three months and still smarts in places.
