1969 Skylark 2 dr Hardtop, Very Solid

Discussion in 'Car Part-Outs' started by AzChevs, Aug 28, 2016.

  1. nickbuickgs

    nickbuickgs nickbuickgs

    Interested in the shell pending pictures
     
  2. AzChevs

    AzChevs Well-Known Member

    Here are some photos, I can get more tomorrow. Its very solid with the only rust being the back window inside corners and some on the back window inside ledge. Windshield lower channel is solid but very dirty, you might get some minor rust starting but nothing I seen and I scrapped it hard. Thanks,Joe
     

    Attached Files:

  3. AzChevs

    AzChevs Well-Known Member


    Here are photos of the core support, does not include any of the T3's or buckets in the price of $140.00. First time taken off, drivers side is very nice while passenger side had the common rust in the battery tray but rest is good. Thanks,Joe
     

    Attached Files:

  4. LOLO

    LOLO Well-Known Member

    Looking for this section of the trunk / weather strip channel?
     

    Attached Files:

  5. AzChevs

    AzChevs Well-Known Member

    I would prefer to sell the body itself as a shell, I am going to list it on Ebay soon and after that part it out if it doesn't sell. Then I will be able to offer up the outer wheel houses, tail panel, trunk pan, back seat divider, floor pan,rockers,front toe boards with firewall and side cowls, top cowl with dash top section,full quarters, roof and A pillars.
     
  6. AzChevs

    AzChevs Well-Known Member

    Cole, If the shell does sell, then I will sell the full outer wheel houses for $175.00 a side, they are rust free, would be cut into the inner so you have the full seam. Thanks,Joe
     
  7. AzChevs

    AzChevs Well-Known Member

    Don, USPS picked up your box yesterday Priority shipping, you should see it within 3 days. Thanks again for the business,Joe
     
  8. cole

    cole Platinum Level Contributor

    Sounds good Joe, I will wait to hear back.............Cole
     
  9. AzChevs

    AzChevs Well-Known Member

    Just finished stripping the body, everything was un-bolted except gas tank straps, some very nice parts including dash harness, engine/headlight harness, A/C parts,drip rail trim, roof side seal trim, tacking strips,side trim, back glass trim, headlight buckets/rings, front/rear bumper cores or brackets sets, very nice hood, trunk lid with key lock hole problem, very nice left fender well, right fender well with common battery rust, glass, door guts, dash parts including black ashtray and glove box door with catch. Lots more smaller stuff including fender bolts,door hinge bolts and trunk hardware. Joe 602-298-7090 Glendale,Az
     

    Attached Files:

  10. buickbob1

    buickbob1 buickbob1

    If you part out the shell, how much are you thinking for the cowl and dash panel? Thanks
     
  11. AzChevs

    AzChevs Well-Known Member

    It would be $225.00 for the top cowl with the top dash area, easier to ship then including the rest of the dash. Shipping can go with Fed Ex ground. Thanks,Joe
     
  12. buickbob1

    buickbob1 buickbob1

    That's sounds pretty good, let me know if go that route.
     
  13. AzChevs

    AzChevs Well-Known Member

    Here are some photos of the rear of the quarters, again, our rust is not the common stuff but more of a crack that lets the air in and it stops. Its just on the drivers side, the passenger side is fine. Thanks,Joe
     

    Attached Files:

  14. AzChevs

    AzChevs Well-Known Member

    I am going to take the body apart, let me know and I can send an invoice for the parts from Paypal. Then I can get the exact shipping cost from Fed Ex after its wrapped up. It should be around the $50.00 area if its just the top of the dash instead of the full dash making the package much more taller. Thanks,Joe
     
  15. AzChevs

    AzChevs Well-Known Member


    Cole, I am going to take the body apart, I can send you an invoice from Paypal for the parts, then about 2 weeks later I can get you the exact cost of shipping from Fed Ex to Washington. It should be around $60.00 for the pair. Thanks,Joe
     
  16. fastest430

    fastest430 Well-Known Member

    OK Joe, I'm interested in it pending the pictures:)
     
  17. jaye

    jaye Well-Known Member

    Do you have the rods that go across the core support & radiator, also the bracket that attaches the rods to the frame.
    Thanks
    Jaye
     
  18. cole

    cole Platinum Level Contributor

    PM'd you Joe
     
  19. buickbob1

    buickbob1 buickbob1

    Sending a PM.
     
  20. AzChevs

    AzChevs Well-Known Member

    Cole, Invoice sent for the Outer wheel houses, Thanks,Joe
     

Share This Page