Overall good driver condition, I cannot find the handle, but if I come across it, I will forward to purchaser. But assume it can not be located. The lid has a crack across it, A repo lid can be purchased from Mike G @ http://www.mrbuick.com/ A bracket was attached to the front of the console and four holes are present. Chrome is in good condition, and all is present. The insert has pitting, and the gear selection lens has a hole in the middle of the R & N Please estimate your shipping costs from Hastings, NE 68901, using UPS @ UPS Tracking http://www.ups.com/WebTracking/track?loc=en_ca I apologies, but I do not have the time to do estimates, and UPS is the most convenient for use in my small town. I will charge actual shipping ,so if your serious about the purchase shipping is what it is. $325.00 + Shipping Thanks, Patrick
Bill, It is identical to the one in my 68, I compared the two tonight, and it came from a 69 that was parted out. Definitely correct for a 68 - 69. Patrick
Ptric maybe just the picture but both of my 68/9 have a handle with a bar across the top and a different handle, if I get a chance I will smap a picture of my extra and post. Thanks Bill.
Now I'm totally confused. It appears to be identical to the one in my 68. I can understand my 68 having a 70-72 assembly in it, given the odd stuff done in an amateur resto. But, to have parted a 69, and it be the same set-up ou: Bill, I'm not understanding what your pointing out. Is their a bar that attaches both sides of the chrome up-rights on the shifter? Does the handle then attach to it? In any case, Bill, Doug thanks for the assistance. I'm convinced you are correct. Patrick
Patrick here are a few pictures of my extra 68-9 shifter handle. was/is very common to replace the handle with 70/72 one, the 68/9 are hard to find. Thanks Bill.