Looking to buy a new radiator for my '67. It has a 71 350 in it, was originally a 340. Are the inlets/outlets the same size and locations? Think they are but need to check. Had factory radiator checked by shop which said should cool but didn't. Looking for really good aluminum unit.
Before you go aluminium, take the radiator to another shop that can disassemble, clean (core) tubes, and re assemble. There must be an old school shop nearby that can do that. Your radiator is 50 years old - it likely needs cleaning! - Bill
I would buy this one with the 1" tubes and never look back. Two 1" tubes are better than three or four 3/4" tubes. http://www.ebay.com/itm/1966-1967-B...on-2-Row-Core-Aluminum-Radiator-/131966419578