1967 skylark partout

Discussion in 'Car Part-Outs' started by 455monte, Jun 11, 2017.

  1. cobra2

    cobra2 Well-Known Member

    OK on the knobs, they just pull off.
  2. 36racin

    36racin Platinum Level Contributor

    Black steering wheel?
  3. Dreamlark

    Dreamlark Well-Known Member

    Do you have good taillight bezels and trim for both rear quarter extensions?
  4. 455monte

    455monte Well-Known Member

    Steering wheel is junk.
    More cracked up than most of them.
    Tail lights and extension trim have normal pitting
  5. Lemans1

    Lemans1 Well-Known Member

    How's the hood?
  6. 455monte

    455monte Well-Known Member

    Front lip of hood is rusted pretty badly
  7. buickdreamin

    buickdreamin I need a new old car ...


    I need a lower front door hinge (with spring). Is the one on this car any good? Thanks.
  8. TrunkMonkey

    TrunkMonkey Well-Known Member

    I am looking for the door windlace pinch molding.

    From the sill plates to the roof, front and back.

    (it's for a convertible, so I really only need the front door and back of the rear door areas, but will pay for the full set if that is better/easier for you)

  9. PGBuick

    PGBuick Well-Known Member

    How about the heater box parts from the engine side of the firewall? I''m thinking about swapping our my A/C box on my 64.
  10. Ken keefe

    Ken keefe Buick Strong

    looking for a driver side rear tail light bezel in good shape. Anything available?
    Thanks, Ken
  11. Dwaine Martin

    Dwaine Martin Member

    I have a 67 skylark 2dr ht sport. everything is missing for the ac and heater , i will need all includindg clips and bolts
  12. guitargroper

    guitargroper Well-Known Member

    What condition is the hood spear?
    Last edited: Dec 30, 2018
  13. dual-quadism

    dual-quadism Black on Black

    I need the hood spear and trunk trim if still available and decent useable shape.
  14. psycholark

    psycholark Well-Known Member

    Do you have left and right head light bezel? This is a skylark with the metal grill, correct? If so are the head light bezels in good shape no major pitting anything broken? How much for the pair?
  15. 1966gs

    1966gs Member

    Is it a floor shift car?
    If so how much for the floor shifter ?
  16. 455monte

    455monte Well-Known Member

    Hood spear and trunk trim are pitted.
    Im saving the headlight bezels.
    The ac lines were butchered by an aftermarket shop.
    I do have a 1966 2 speed floor shifter and console. Same as 67 except grain pattern on side of console is different
  17. 67 Post GS

    67 Post GS Well-Known Member

    I need the RH (pass) side rear wheel well molding for 67 GS Anything ? Ron
  18. 455monte

    455monte Well-Known Member

    Ron those are a hot item and hard to find.
    When they pop up people want an arm and a leg for em!
    Last set i got i traded a camaro shell for them
  19. ancientx

    ancientx horn/antler&bone carver

    Interested in that shifter.
    Would like to see pics of the car/what's left before I ask about any more bits and parts.
  20. red68skylarkcon

    red68skylarkcon Well-Known Member

    How bad is the steering wheel?

Share This Page