1966 Buick Special $2500 Alsip, IL 2-dr V-6 with 3pd

Discussion in 'Cars and Parts For Sale Leads' started by urbancowboy0307, Oct 18, 2012.

  1. urbancowboy0307

    urbancowboy0307 Silver Level contributor

    Not mine,

    V-6 engine and 3-sp be a neat little driver i'm sure.

    http://chicago.craigslist.org/chc/cto/3346223327.html

    IM SELLING MY 1966 BUICK SPECIAL FOR $2,500 RUNS AND DRIVES EXCELLENT ITS 3 SPEED MANUAL ON THE COLUMN! 3 ON THE TREE! THE MOTOR STARTS VERY FAST RUNS LIKE A BRAND NEW CAR! NEEDS A LITTLE TLC HAS SOME BODY RUST FRAME AND FLOOR PANS ARE IN GOOD CONDITION MOST OF THE RUST IS IN THE FRONT FENDERS! IT WILL NEED 1/3 OF ROCKER ON THE DRIVER SIDE AND ONE REAR QUARTER PANEL ON DRIVER SIDE, INSIDE THE TRUNK THERE IS FEW SMALL HOLES AS WELL. OTHER THAT THAT THE BODY IS SOLID! THE CAR WILL NEEDS BRAKES AND BRAKE LINE! THIS IS THE SAME EXACT BODY AS A 1966 CHEVELLE!

    IM ASKING $2,500 O.B.O. OPEN TO TRADES!

    YOU CAN REACH ME AT (708) 745-0833
     
  2. Matt S

    Matt S Matt

    I think this needs more than just some TLC:puzzled:

    Matt
     
  3. urbancowboy0307

    urbancowboy0307 Silver Level contributor

    i'd have to agree with you, reminds me of the first '67 i owned that was more rust than not......
     
  4. Taulbee2277

    Taulbee2277 Silver Level contributor

    How accurate is that? I thought they were no where near the same??
     
  5. urbancowboy0307

    urbancowboy0307 Silver Level contributor


    I think it's the same frame, but the fenders and 1/4s are different, it could be made to fit but you'd have to change everything to get it to match.

    then you'd have a Skyvelle or a Chevlark :grin:
     
  6. wkillgs

    wkillgs Gold Level Contributor

    On the plus side, the car looks very straight, might still have original paint, and the interior looks complete....right down to the steering wheel and radio delete plate!
    Rust issues need close inspection. Rocker panel rot is unusual, might've been caused by clogged water drains... I'd suggest taking a good look at the lower cowl area too.
    And another plus.... the pedal/linkage/and bellhousing will work nicely for a 300/340/350/400/430/455 swap! Then add the 4 or 5 speed of your choice.:cool:

    Chevelles are actually a little shorter in the rear, frame is about 2 inches shorter than Buick/Olds/Pontiac.
     
  7. 197064buickspec

    197064buickspec 1964 Special Post-455

    I know it's been on Craig's list for a while.

    I swear it was for sale for $900 prior to this guy owning it from what I remember correctly. But I may be wrong.
     
  8. Tom Miller

    Tom Miller Old car enthusiast

    WOW, I hope he's not just showing pics of the passenger side, because it's the "good" side. I wonder how bad the rot is on the driver side?????

    That passenger fender has SEVERE rot, not just a simple patch at the bottom, the rot is way above the body line.WOW:shock:
     
  9. 197064buickspec

    197064buickspec 1964 Special Post-455

    If the obvious exterior looks like that guess what the underside and inside looks like?
     
  10. ronbz455

    ronbz455 Big Butz Racing

    I had one. That's a 500 dollar car. Alot of rust.
     
  11. Psabre62

    Psabre62 Well-Known Member

    Anything around the Chicagoland area will have serious rust issues if the car spent it's life here! Some of the Chevelles of the same vintage would have an asking price of double that just because it's old. Still cheaper to go out west and buy than start repairing severe rust and rot!
     
  12. urbancowboy0307

    urbancowboy0307 Silver Level contributor

    He's dropped his price to $1800

    http://chicago.craigslist.org/chc/cto/3577254612.html


    IM SELLING MY 1966 BUICK SPECIAL FOR $2,500 RUNS AND DRIVES EXCELLENT ITS 3 SPEED MANUAL ON THE COLUMN! 3 ON THE TREE! THE MOTOR STARTS VERY FAST RUNS LIKE A BRAND NEW CAR! NEEDS A LITTLE TLC HAS SOME BODY RUST FRAME AND FLOOR PANS ARE IN GOOD CONDITION MOST OF THE RUST IS IN THE FRONT FENDERS! IT WILL NEED 1/3 OF ROCKER ON THE DRIVER SIDE AND ONE REAR QUARTER PANEL ON DRIVER SIDE, INSIDE THE TRUNK THERE IS FEW SMALL HOLES AS WELL. OTHER THAT THAT THE BODY IS SOLID! THE CAR WILL NEEDS BRAKES AND BRAKE LINE! THIS IS THE SAME EXACT BODY AS A 1966 CHEVELLE!

    IM ASKING 1,800!

    YOU CAN REACH ME AT (708) 745-0833
     

Share This Page