1965 Buick Skylark Super Turbine 300 transmission issue

Discussion in 'The "Juice Box"' started by pepe, Mar 26, 2019.

  1. pepe

    pepe Member

    My Skylark started to feel and make a clunk sound as I slowed down to a stop. It accelerates and decelerates fine, but as soon as I slow down to a full stop I feel the clunk. Not sure if a transmission issue or something else. Anyone have any suggestions about what it could be? Hoping it’s a simple adjustment that’s off on the transmission. Appreciate the help!
    Chris
     
  2. Electra man

    Electra man Older and Slower

    Check the transmission mount. If its original the rubber deteriorated and separated from the metal.
     
  3. telriv

    telriv Well-Known Member

    A bad modulator valve will do that.. Used to replace them all the time back in the day.

    Tom T.
     
    300sbb_overkill likes this.
  4. pepe

    pepe Member

    Thanks I’ll check both of these out and let you know.
     
  5. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD"

    Might be the transmission downshifting normally but you are feeling it because there is too much line pressure. Modulator could cause that, but it would likely cause other shift problems. Are you sure it isn’t a worn u joint?
     
  6. pepe

    pepe Member

    I have play in the drive shaft and can shift it a little, but it doesn’t seem to be at the u joint. Not sure if there is a margin of movement while the car is in park?
     

Share This Page