1956 Buick Special trans. mount

A frind of mine needs the transmission 2 piece mount for his 56 with a 322 engine i beleive

 

I recently bought a 56 buick from CA. and someone did some trans work and never replace a bracket at the rear. I have been looking on the net and having no luck. This bracket is ell shaped and mounts directly to bottom of dynaflow with 4 bolts then attaches to a solid rubber mount to the cross brace support with 3 bolts I looking for bracket and rubber piece which is separate. Any help would be greatly appreciated. Thanks Dan P.S. new to this forum and enjoy reading the post and info on older Buicks

 

here are the rubber mounts

http://www.classicbuicks.com/Mounts_Pads.html

I will keep a look out for the steel bracket


Here is a complete dynaflow $100

http://www.jalopyjournal.com/forum/showthread.php?t=785959&highlight=dynaflow

 

Thanks Ross, for that link its good pic of the bracket that I need but no name for it or anytthing I dont understand that ell bracket bolts to the trans and then to that rubber part, very strange no info? Thanks again for your time your a goog guy. Dan

 

I have a 56 and 57 both with 322 nailheads. let me know if you still need.