I have a couple of good used sets of gears 10 bolt 8.5 3.23 good clean gm used gears 85.00 10 bolt 8.5 3.73 good clean gm used gears 65.00 (2 sets) 10 bolt 7.5 3.23 good used GM gears 55.00 10 bolt 7.5 3.73 good clean used gm gears 65.00 (2 sets) gas mileage gears 10 bolt 7.5 2.41 gm gears 45.00 might want to think about these for the everyday cars...lol 5.00 a gallon gas coming 10 bolt 8.5 2.41, 2.56, 2.73 40.00 each all very good used gm gears Shipping is 10.00 for any gear set. Thanks, Jim 330 659 7117 Richfield, oh
In line. Interested in an 8.5 3: 73 set. I have a 2:56 posi now. Do you also have a kit to install those gears in my rearend? Thanks, Don
to properly install a ring and pinion you want to have an assortment of pinion shims, carrier shims new carrier and pinion bearings and races, good pattern grease, 3.8 torque wrench and a dial torque wrench to measure pinion and carrier preload. and a dial indicator to check backlash.
Don, Yes we have a kit- PM me and will get you all the prices. I think i have enough 3.73 gears for all that are interested. What about your carrier? you have 2.56 gears are you buying a carrier also or a spacer kit? Please PM me if you do not understand 2.41 2.56 ratio are on a 2 series carrier 2.73-4.56 and beyond are on a 3 series carrier This is for posi or non posi. Jim J D ---------- Post added at 01:35 AM ---------- Previous post was at 01:32 AM ---------- 462 chevelle got it about spot on- If you really want to do it right just get the install kit as it will have everything you need to totally rebuild the center of the rear end NEW AGAIN. If you are going from 2.56 you will need a 3 series carrier or a spacer kit which we sell too. Also have posi units and open 3 series open 3 series will be the cheapest way at 25.00 you can not beat it. Posi is much more but fun to have to spin both tires. Jim
Can anyone afford NEW 3.23 gears? I have them 149.00 a set. NEW unlimited... 3.42 also as long as your a Buick board member. Jim
Jim, I am interested in the 2.73 for the 8.5 rear end. Is anything needed to use on a 3 series carrier? ---------- Post added at 02:06 PM ---------- Previous post was at 02:06 PM ---------- Jim, I am interested in the 2.73 for the 8.5 rear end. Is anything needed to use on a 3 series carrier?
Jim, Sorry I just remembered that I have a 3.08 gear set so I will pass on the 2.73's. ---------- Post added at 01:42 PM ---------- Previous post was at 01:42 PM ---------- Jim, Sorry I just remembered that I have a 3.08 gear set so I will pass on the 2.73's.
