Anyone know if such a thing exists? I have a set of 71-85 Rallye wheels. They won't fit over the hob. The originals were 3-1/2". The 71+ are 3". There also is a 1/2" difference in backspacing. So I'm thinking I need a 1/2 spacer with a 3-1/2" center hole. I've searched all over and can't seem to find anything like this. Anyone have any ideas? This for a 1962 Lesabre by the way.
Personally, I hate spacers but not as much as adapters. I have reluctantly used a 1/8" spacer as a stopgap until I could do something better. If you do find such a spacer, make sure you have enough lug bolt/nut engagement or use longer studs. This might be what you are looking for: 5x5" x .5" with 87.1mm(3.43") center: https://www.amazon.com/Billet-Wheel-Spacers-Pattern-Trucks/dp/B01KU5G1WK
Thanks, I'll look in to these. They may fit as is (3.429" I.D.). If not, I suppose I can toss them in the lathe and skim the difference.