1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Engine and Trans Bolt Kits

Discussion in 'Parts for sale' started by ToddsGS, Aug 3, 2019.

  1. ToddsGS

    ToddsGS Founders Club Member

    I have a few Bolt Kits I've put together for Mounting your Motor and Trans . . . . .



    455 Motor Mount Bolt Kit includes:
    2) Motor Mount Bolts and Nuts
    4) Motor Mount to Engine Bolts
    6) Motor Mount to Frame Bolts
    Price on this kit is $25 (350 Kits also available)

    [​IMG]




    Frame Pad and Bolt Kit includes:
    2) Big Block Motor Mount Frame Pads
    2) Motor Mount Bolts and Nuts
    6) Motor Mount to Frame Bolts
    Price on this kit is $99
    Engine Motor Mounts also available if needed.....

    [​IMG]
    [​IMG]




    Buick Crossmember Bolt Kit
    Factory Correct - Phosphate Bolts, Nuts & Washers
    Kit Includes:
    Crossmember to Frame Bolts, Nuts & Correct Thick Washers
    Trans Mount to Transmission Bolts
    Trans Mount to Crossmember Bolts & Washers
    Transmission (Bellhousing) to Motor Bolts
    Price in this kit is $30

    BuickTransmissionBoltKit.jpg




    Buick Transmission Mounting Kit
    Factory Correct - Phosphate Bolts, Nuts & Washers
    Kit Includes:
    Trans Mount - Th350 or Th400
    Crossmember Brackets & Cushions
    Trans Mount to Transmission Bolts
    Crossmember to Frame Bolts, Nuts & Washers
    Trams Mount to Crossmember Bolts & Washers
    Price on this kit is $95

    [​IMG]




    Shipping is extra and in most cases starts around $8.00 via Priority Mail Flat Rate




    [​IMG]




    Thanks for Looking,


    1000's of Buick GS/GSX/Skylark Fasteners now available on my website.
    These are NEW fasteners, and Made in the USA.


    [​IMG] [​IMG] [​IMG] [​IMG]


    [​IMG] [​IMG] [​IMG]





    00001.Stage1RestorationBanner_350.jpg
     
    Last edited: Jun 23, 2023
    tubecatgs likes this.
  2. Donuts & Peelouts

    Donuts & Peelouts Life's 2 Short. Live like it.

    Do you have the bolts that mate the engine to trans?
    And converter ?
     
  3. ToddsGS

    ToddsGS Founders Club Member

    I have both styles of bolts that GM used to mount the Engines to the Transmissions.

    Standard Hex Style
    [​IMG]



    And in some cases a Flange Style Bolt was used which I have in stock also.....
    [​IMG]


    I am currently sold out of the Converter bolts but will have more in stock next week.

    Most of my Transmission related bolts can be seen here > (Bottom of the page) https://www.diecastmusclecars.com/BuickTransmissionPage.htm


    Thanks for looking!


    .
     
  4. Donuts & Peelouts

    Donuts & Peelouts Life's 2 Short. Live like it.

    I'll buy when I make a big list, Ill start a list and get back at you.
     
    ToddsGS likes this.
  5. ToddsGS

    ToddsGS Founders Club Member

  6. ToddsGS

    ToddsGS Founders Club Member

  7. ToddsGS

    ToddsGS Founders Club Member

  8. ToddsGS

    ToddsGS Founders Club Member

  9. ToddsGS

    ToddsGS Founders Club Member

  10. ToddsGS

    ToddsGS Founders Club Member

Share This Page