1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Buick 455 distributor interchangeability

Discussion in 'Sparky's corner' started by Electra Sweden, Jan 19, 2023.

  1. Electra Sweden

    Electra Sweden Well-Known Member

    I am looking for a shaft for my Buick 455 1970. People say Buick distributors are rather interchangeable. The 350 distributor is supposed to fit if the gear is changed. Does this go for all year models of the 350? Does it also apply to the 300 distributors? Then going forwards, are all 455 distributors interchangeable in this same way? Is it only the assembly as a whole that is interchangeable, or are the shaft and housing also equal?

    The 1970 Buick 455 is supposed to be have the 1111984 distributor, but I have a 1112104 distributor on which is from some other year model.
     
  2. Bens99gtp

    Bens99gtp Well-Known Member

    I know 350s to 400/430/455 only takes a gear change. Can't confirm other v8
     
  3. sean Buick 76

    sean Buick 76 Buick Nut

    Only the 350 and 455 dist interchange yes any year 68-81.
     
    Last edited: Jan 20, 2023
  4. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    I believe you can just swap the gear on any small block Buick distributor, and it will fit the big block. That includes even the 215-300, and 340. If you look at the applications for say, the TA ready to run electronic distributor, it includes those engines. The gear, and the advance curve would be the only differences between stock production distributors over the years.

    http://taperformance.com/proddetail.asp?prod=TA_724B
     
    rkammer and mitch28 like this.
  5. 12lives

    12lives Control the controllable, let the rest go

    The distributors are, as Larry said, physically interchangeable. However I believe not all the parts are. If you are looking for a new shaft be sure it matches your old one where the weights are. I've seen some different top plates/advance plate. Of course this could be due to interchanges between different years made during a repair since these are now 50+ years old!
    Is your shaft worn? Could be just the bushings? Why do you think you need a new shaft?
     
    mitch28 and Max Damage like this.
  6. Electra Sweden

    Electra Sweden Well-Known Member

    My distributor had a really worn bushing and the shaft became scored over the whole bushing contact area. Discovered this by chance before anything really bad happened. I think the deepest scratches were around 0.1 m.m. So a new bushing would probably wear out fast, while sprinkling debris into the engine. Some day I might try to fix it if I get my hands on a lathe and some others tools on my wish list :) I guess the shaft could be sleeved. Or perhaps you could build up the scratches using welding or soldering, but would probably be hard avoiding warping the shaft.
     
  7. 87GN_70GS

    87GN_70GS Well-Known Member

    Isn't the HEI gear different diameter on the ID? This would mean the HEI shaft has a different diameter?
     
  8. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    I think the roll pin is bigger on the HEI. Pretty sure you can just drill out a points gear to use the bigger roll pin.
     
    john.schaefer77 likes this.
  9. 12lives

    12lives Control the controllable, let the rest go

    Yes
     
  10. 12lives

    12lives Control the controllable, let the rest go

    my 2 cents - Used distributors are cheap and plentiful. You would be much better off getting another distributor or 2 to rebuild. Or buy the TA unit. I know shipping is a b*t*ch but its much less painful than the repair you are contemplating.
     
  11. Electra Sweden

    Electra Sweden Well-Known Member

    Yes, maybe. I found some interesting distributors on ebay, Also still seriously considering some of the TA performance distributors, but they would be 350-450 USD at arrival when shipping and taxes are paid.
     
  12. 12lives

    12lives Control the controllable, let the rest go

Share This Page