1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
New users Registered with a gmail address Attention All new Users

70 Stage One “Boogie” breakdown

Discussion in 'Chassis restoration' started by Clay455, Jun 19, 2024.

Page 4 of 4
  1. Clay455

    Clay455 Well-Known Member

    IMG_8522.jpeg IMG_8523.jpeg IMG_8524.jpeg IMG_8525.jpeg IMG_8526.jpeg IMG_8527.jpeg IMG_8528.jpeg IMG_8534.jpeg IMG_8535.jpeg IMG_8536.jpeg IMG_8537.jpeg IMG_8538.jpeg I got a lot accomplished today underneath the Stage One. It came back from the blaster and the sheetmetal looked incredible. I got it cleaned up and sprayed some block epoxy under it. Now I can get it back down on the chassis and hang the quarters.
     
    Clay455, Dec 10, 2024
    #61
    VET, 12lives, Brett Slater and 1 other person like this.
  2. Clay455

    Clay455 Well-Known Member

    IMG_8531.jpeg IMG_8532.jpeg IMG_8533.jpeg I’m going to run the 71 Rearend I got from JTroop for now. It cleaned up really nice.
     
    Clay455, Dec 10, 2024
    #62
    VET, 12lives, tdacton and 1 other person like this.
  3. Clay455

    Clay455 Well-Known Member

    IMG_8541.jpeg IMG_8540.jpeg IMG_8539.jpeg Undercoating is done
     
    Clay455, Dec 13, 2024
    #63
    VET, 12lives, 3shields and 1 other person like this.
  4. Redmanf1

    Redmanf1 Gold Level Contributor

    Looks nice, what coating did you end up using?
     
    Redmanf1, Dec 19, 2024
    #64
    Clay455, VET and 12lives like this.
  5. flh73

    flh73 Gold Level Contributor

    flh73, Dec 19, 2024
    #65
  6. VET

    VET Navy Vet, Founders Club

    Don't think I've ever seen that color of undercoating before, I like it. Vet
     
    VET, Dec 19, 2024
    #66
    Clay455 likes this.
  7. 3shields

    3shields Let's go, MOUNTAINEERS!!!

    I get this from a local detail shop. 20241219_154846.jpg
     
    3shields, Dec 19, 2024
    #67
    Clay455 likes this.
  8. VET

    VET Navy Vet, Founders Club

    VET, Dec 19, 2024
    #68
  9. Clay455

    Clay455 Well-Known Member

    I epoxied the bare metal with a two part black epoxy Valspar DTM. Great coverage. Then I applied the HUD BRIGHT Rubberized HUD 12 undercoating. John Riley turned me onto it. Great coverage. If you want it thicker let just add more coats after it drys.
     
    Clay455, Dec 20, 2024
    #69
    VET and 12lives like this.
  10. Redmanf1

    Redmanf1 Gold Level Contributor

    How many cans did it take to coat it good?
     
    Redmanf1, Jan 6, 2025
    #70
Page 4 of 4

Share This Page