Parting out a 1965 Buick Skylark, LP 300-4bbl ST300 car, was factory AC and power steering, Selling everything. Located in Mobile AL. AC Vents sold, wheel well trim sold, rear tri shield emblem sold, AC controls sold.
Let me pull it all out and see what condition its in, the car sat for a very long time. Once I get it all removed ill send you a picture of everything and we can come up with a price if thats ok.
I'm still in for the AC stuff. Do you want to pm me and discuss prices before you start the job? I know its fairly labor intensive to get the system out..
Interested in the from turn signal housings (with mounting nuts) depending on condition. The housing studs will likely SNAP if there is any rust whatsoever. So I’d like to purchase the housings WITH the mounting brackets STILL attached. Thanks!
yes I have the crank, power steering and I think the waterpump pully, Which one do you need, this was an AC car.
I need the round part that goes between the steering wheel and the turn indicator switch. Also and nuts, washers or springs that come off as you remove the steering wheel. I am installing a non tilt column in my 1965 Skylark but am using a steering wheel from a tilt. That round part seems to be different in different applications. The turn indicator switch must be the same as the picture I am including or that part will not work. If this is too much hassle I understand.
