430 engine: $800+shipping (doe NOT include the Edelbrock carb) original number matching carb: $200 Driver side door panel: $150+shipping Passenger side door panel: $150+shipping rear bumper: $300+shipping rear custom made seat: $250+shipping dash: $300+shipping Head lights: $150 pair or $90 each Drum brakes: $50 each + shipping whole car: $1750+shipping Ask for other parts and everything else! Thanks!
how badly pitted are the tail light bezels? and are the lenses cracked? I might be interested in the whole rear bumper too
They are in really good shape, I'll take a couple of pictures tomorrow and put them on here. The bumper is in really good condition, too. Thanks!
thanks, pics would be great. my bumper is arrow straight and it looks like that one is too, the chrome on mine is getting dull though and a spare would be a good thing to have
Id be interested in some trim parts if they are perfect. I also need the fillers between the bumper and trunk.
What kind of shape is the fender front edge moldings in? These continue on either side from the hood lip molding and then travel down the side of the leading edge of the fender. Thanks.
Most of the trims are good, the driver side trim needs to be fixed but it's an easy fix I think. Hope the pictures help! Thanks! ---------- Post added at 11:48 AM ---------- Previous post was at 11:47 AM ---------- All of the moldings are in good shape besides the hood. If you need more pictures, let me know! Thanks!
I am definitely interested in the tail light lenses and bezels and again, not above buying the whole bumper. I might be interested in some of the A/C parts as well as I want to convert my automatic A/c to the manual AC/
Please send pictures of the moldings on the leading edges of the fenders to kenlisk@optonline.net. They look to have avoided damage that the hood has as best I can tell. Thanks!
Just PM'd you, thanks! ---------- Post added at 04:38 PM ---------- Previous post was at 04:37 PM ---------- Just sent you a message! ---------- Post added at 04:39 PM ---------- Previous post was at 04:38 PM ---------- here are the pictures of the filler, I think. Thanks!
Wheel opening moldings is what I need but have to be perfect. I have decent ones with a few minor dents in them. The filler I need is for the right. My L is in good shape. Still lots of really good and hard to find parts on that car.
Riviera switch has provision for the vacuum headlights, and is Riviera only - any '68 full size knob will fit your cat. :TU:
The rear two moldings are PERFECT, but the front left has a dent, the right is near perfect with a bump on the inside, but outside is perfect. I uploaded a picture of the bump. Thanks!