Parting a 64 Skylark 2 door hardtop. Massively rusty. Drivetrain is spoken for (someone put a Pontiac 350/manual trans in it, and I'm taking it for my son's 65 Tempest). think the only sheet metal that is salvageable would be the front fenders, but they'll need patches at the bottom. Has bucket seats; not sure if they're saveable or not. Good glass (windshield is delaminating though), side trim, driver quality tail lights and grille. Dash cluster may be usable. Let me know what you need, and I'll let you know if it's any good. Located in Selmer, Tennessee.
You're referring to the wheel opening trim, right? It has the driver side front and passenger side rear. I'll have to see if I can get them off without damage.
The dash is rusty, so I presume the glove box door is too, but I'll look tomorrow. I'll also look at the front signal lenses.
Glove box door is heavily pitted. The passenger side turn signal lens may be ok, if I can get it off without breaking it.
I mainly need the glove box door "latch" and I'm in need of "one" decent used lens. This may work out yet!! Let me know...…………. THANKS!
I'm off work tomorrow, so I'll go out and remove parts tomorrow and let people know condition. Thanks!
One of the studs broke off, but here's a couple of pictures. Let me know if it's something you want Edit: apparently the pictures didn't upload. If you're interested, send me an email to importsmasher@gmail.com and I'll send pictures
Do you need the loop that attaches to the glove box door, or the lock assembly in the dash? I don't have the lock assembly. I did get the right side turn signal lens off. I can't seem to get pictures to upload, so if you send me an email, I'll send pictures. Importsmasher@gmail.com.
Got the left front off. Send me an email at importsmasher@gmail.com and I'll reply with pictures. The right rear has been hacked for tire clearance, and I don't think I can get it off without destroying it.